home *** CD-ROM | disk | FTP | other *** search
/ The Original Shareware 1.1 / The Original Shareware (WeMake CDs)(Volume 1.1)(CDs, Inc)(1993).iso / 36 / qostnote.zip / VGA.TEC < prev    next >
Text File  |  1990-07-03  |  5KB  |  123 lines

  1. ID:VG Discussion of DESQview Video Modes
  2.  
  3. 1)  Available font sizes: 25, 30, 50, 60
  4.  
  5.     a) Text fonts:  25, 50
  6.  
  7.     b) Graphics fonts: 30, 60
  8.  
  9. 2)  Ways to use different font sizes
  10.  
  11.     a) ALT-Rearrange-Video displays font size choices in Desqview
  12.     
  13.     b) Setting the program itself to a certain font size should be 
  14.        respected in Desqview, but you may need to adjust 'Maximum
  15.        Height' to an appropriate number of lines or 'Text Pages to
  16.        2 or greater, but if 'Text Pages' is set to greater than 1, 
  17.        'Maximum Height' is limited to 25.  It sometimes works better
  18.        to set 'Text Pages' to '2', and sometimes 'Maximum Height' 
  19.        set to the higher number works better.  These settings are
  20.        in 'Change-a-Program', 'Advanced Options.
  21.  
  22. 3)  Ways programs write to the screen
  23.  
  24.     a) Directly to Video Memory (Write directly to the screen)
  25.  
  26.     b) Ask to BIOS to write to screen (Screen writing managed by BIOS)
  27.  
  28. 4)  Which programs write directly to the screen
  29.  
  30.     a) All Graphics Programs
  31.  
  32.     b) About half of all text programs
  33.  
  34. 5)  What the screen can display at any one time
  35.  
  36.     a) One text font
  37.  
  38.     b) Any number of graphic fonts and graphic images
  39.  
  40.  
  41. 6)  How to tell if a program writes directly to the screen
  42.  
  43.     a) If it's a graphic program, it writes directly
  44.  
  45.     b) Set 'Change-a-Program', 'Writes Text directly to the screen?' 
  46.        to 'N'.  Now start the program and try to put it in a small
  47.        window.  If it writes outside of the Desqview borders,  that
  48.        means the program writes directly and 'Writes Text Directly...' 
  49.        must be set to 'Y'.
  50.  
  51. 7)  When you need to set 'Virtualize Text and Graphics' to 'Y'
  52.  
  53.     a) Virtualization is only for Direct Screen Write programs
  54.  
  55.     b) You only need to Virtualize if you want the progam to stay
  56.        running while it's in the background or stay running while
  57.        it's in a small window.
  58.  
  59.     c) Virtualizing slows programs down, so if your program doesn't
  60.        need to stay running in the background or in a small window,
  61.        you would want 'Virtualize...' set to 'N'.
  62.  
  63.     d) Virtualizing requires Expanded Memory.  If the machine is
  64.        low on Expanded memory,  the screen could behave poorly
  65.        when a Virtualized window is displayed.
  66.  
  67.     e) If a program is not a Direct Screen Writer, 'Writes Text 
  68.        Directly...' and Virtualize...' should both be set to 'N'.
  69.        Desqview can run these programs in a small window and in
  70.        the background without any special adjustments.
  71.  
  72. 8)  Switching Video Modes
  73.  
  74.     a) When switching from a window that is using a Graphic mode to
  75.        a window that is using the 25 line Text mode, the Text program 
  76.        will sometimes display 25 lines on a 30 line screen.  When 
  77.        this happens, the bottom 5 lines of the screen will display
  78.        the program that is in the background.  Because there is no 25 
  79.        line Graphic mode, Desqview has to do it this way.  When the 
  80.        screen is in a graphic mode, Desqview has to display Text 
  81.        programs as a Graphic also.  In graphic mode only 30 and 60
  82.        line fonts are available.
  83.  
  84.     b) One way to run a Graphic program and still have your Text
  85.        program display in a 25 line font is to do ALT-Rearrange-Hide
  86.        before switching away from the Graphic program. This will
  87.        hide it from the screen and allow the Monitor to switch to 
  88.        the 25 line Text font.  A hidden program that writes directly 
  89.        to the screen (all Graphics programs) will not be able to run 
  90.        while it is hidden.
  91.  
  92.     c) Another way to use a Graphic program and switch to a 25 line
  93.        Text program is to run the Desqview 'Setup' program and set
  94.        '..display Text and Graphics at the same time?' to 'N'.  Now
  95.        when you switch from the Graphic program to the Text program, 
  96.        Desqview will put a Curtain over your Graphic program and 
  97.        allow the Monitor to return to the Text mode.  Virtualization 
  98.        will not be possible when this option is selected.
  99.  
  100. 9)  Extended VGA Modes
  101.  
  102.     a) The highest resolution in the IBM VGA Specification is 640x480.
  103.  
  104.     b) Some VGA cards have the capability of displaying resolutions
  105.        of 700X420, 800X600, and 1024X768.  These modes are not
  106.        standardized and most of the manufacturers of these cards 
  107.        impliment these resolutions differently - consequently
  108.        Desqview cannot fully support these modes.       
  109.  
  110.     c) Desqview will support 640X480 in that it can Save and Restore
  111.        screen when programs are switched away from and back to.  It
  112.        can also Virtualize this resolution, meaning it will allow a
  113.        'Direct Screen Write' program to stay running in a small 
  114.        window or in the background without bleeding through the
  115.        foreground window.
  116.  
  117.     d) Desqview can Save and Restore 800X600 on some VGA cards if
  118.        'Graphic Pages' in 'Change-a-Program' is set to 4, but it
  119.        cannot Virtualize it.  I'ts sometimes O.K. to set 'Runs in 
  120.        Background' to 'Y' and not Virtualize for purposes of printing 
  121.        in the background if the program doesn't do screen updates 
  122.        or only does minor screen updates while it's printing.  
  123.